Numerical Analysis of Stirling Engine (3rd Report, Investigation of Engine Particulars)

Hiroshi Sekiya, Jyunji Matsue

研究成果: Article査読

抄録

For the purpose of predicting and evaluating of the Stirling engine performance in detail, the cycle simulation code requires a technique for the 3rd-order method. The first paper presented our code which was useful in the research and development of our Stirling engine NS 30 S. In the second paper, a comparative study of working gases (helium and hydrogen) was carried out, and the effect of the test conditions of temperature was investigated. In addition, the calculated results were inspected in comparsion with the experimental ones This paper describes the test conditions of pressure and the cylinder volume and the piston phase angle affecting the Stirling engine performance and design. Then, the particulars of heat exchangers are evaluated as to design optimization. As a result, it is verified that our code is an available tool for optimizing the Stirling engine design.

本文言語English
ページ(範囲)2457-2464
ページ数8
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series B
57
539
DOI
出版ステータスPublished - 1991
外部発表はい

ASJC Scopus subject areas

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Numerical Analysis of Stirling Engine (3rd Report, Investigation of Engine Particulars)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル