Numerical analysis of the melt behavior in a fuel support piece of the BWR by MPS

Ronghua Chen, Lie Chen, Kailun Guo, Akifumi Yamaji, Masahiro Furuya, Wenxi Tian, G. H. Su*, Suizheng Qiu

*この研究の対応する著者

研究成果: Article査読

22 被引用数 (Scopus)

抄録

The fuel support piece in a boiling water reactor (BWR) is used to brace fuel assemblies. The channel within the fuel support piece is determined to be a potential corium relocation path from the core region to the lower head during the severe accident of BWR. In the present study, the improved ∗∗∗Moving Particle Semi-implicit (MPS) method was adopted to simulate the flow and solidification behavior of the melt in a fuel support piece. The MPS method was first validated against the Pb-Bi plate ablation test that was performed by CRIEPI. The predicted ablation mass of the plate agreed well with the experimental results. Then the flowing and freezing behaviors of molten stainless steel (SS) and zircaloy in the fuel support piece were simulated by MPS method with a three dimensional particle configuration, respectively. In this study, the flow and solidification behavior of SS was simulated first. After all the SS passed through the channel, the flowing behavior of Zr in the fuel support piece was simulated. The simulation results indicated that the crust layer formed on the inner surface of the fuel support piece during the melt discharging process. The fuel support piece was plugged by the solidified zircaloy particles in the lower initial temperature case. The fuel support piece kept intact in all the calculation that were performed under the assumed order of melt injection. The present results could help to reveal the progression of a BWR severe accident.

本文言語English
ページ(範囲)422-439
ページ数18
ジャーナルAnnals of Nuclear Energy
102
DOI
出版ステータスPublished - 2017 4月 1

ASJC Scopus subject areas

  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Numerical analysis of the melt behavior in a fuel support piece of the BWR by MPS」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル