Numerical simulation of hysteresis on head/discharge characteristics of a centrifugal pump

Masamichi Iino, Kazuhiro Tanaka, Kazuyoshi Miyagawa, Takeshi Okubo

研究成果: Conference contribution

13 被引用数 (Scopus)

抄録

The objectives of the present study were to investigate influences of fins, set in a suction part, on the positive slope and hysteresis loop in head/discharge characteristic curves of centrifugal pumps in the experiment as well as in the numerical prediction. The fins were located in upstream side of a pump impeller to suppress swirl flow occurring before the impeller inlet at partial load operation. We had two kinds of centrifugal pump with/without the fins, the number of which is 16. These two centrifugal pumps had a shrouded impeller with 7 blades and a diffuser with 20 guide vanes with the same configuration. In the experiment, the pump with them had a large hysteresis loop at partial load operation in the head/discharge characteristic curve, although the pump without them had no hysteresis loop. In the numerical simulation based on periodic flow, the incompressible turbulent flow field was calculated for partial blade-passages with periodic boundary conditions. As a result, the simulated characteristics had the same tendencies as the experimental results. Furthermore, the causes of the discontinuous head/discharge characteristics depending on the direction of partial load operation were clarified through calculating and comparing the internal flow fields in the cases with/without the fins. The pumps had the large backflow and recirculation areas in two places, one of which was near the shroud at the impeller inlet including the fins area and another near the central part of the diffuser. The difference in the hysteresis loop between with and without the fins was caused by the existence of the fins, which suppressed or promoted the backflow at the impeller.

本文言語English
ホスト出版物のタイトルProceedings of the 4th ASME/JSME Joint Fluids Engineering Conference
ホスト出版物のサブタイトルVolume 2, Part B, Symposia
編集者A. Ogut, Y. Tsuji, M. Kawahashi, A. Ogut, Y. Tsuji, M. Kawahashi
ページ1165-1172
ページ数8
出版ステータスPublished - 2003 12 1
外部発表はい
イベント4th ASME/JSME Joint Fluids Engineering Conference - Honolulu, HI, United States
継続期間: 2003 7 62003 7 10

出版物シリーズ

名前Proceedings of the ASME/JSME Joint Fluids Engineering Conference
2 B

Conference

Conference4th ASME/JSME Joint Fluids Engineering Conference
国/地域United States
CityHonolulu, HI
Period03/7/603/7/10

ASJC Scopus subject areas

  • 機械工学
  • 流体および伝熱

フィンガープリント

「Numerical simulation of hysteresis on head/discharge characteristics of a centrifugal pump」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル