Numerical simulation of industrial die filling using the discrete element method

Yuki Tsunazawa, Yusuke Shigeto, Chiharu Tokoro, Mikio Sakai

    研究成果: Article査読

    31 被引用数 (Scopus)

    抄録

    Die filling is an important aspect of powder molding in chemical engineering. The discrete element method (DEM) has been applied to simulations of die filling systems in the literature. In these simulations, the die has been modeled by simple shapes such as cylinders and cuboids. However, industries require modeling of complex die shapes in the computations. In addition, the existing DEM is problematic from the viewpoint of industrial applications, since complexly shaped dies might not be modeled by existing technologies. To solve this problem, the signed distance function (SDF) model is applied to the DEM simulation (DEM/SDF) and the DEM/SDF approach is validated for arbitrarily shaped dies. Focusing on macroscopic powder flow, simulation results are compared with experimental results, and good agreement is confirmed for the spatial distribution of velocity, the projection areas of the shoe, and the final mass of filling particles. Therefore, the adequacy of the DEM/SDF model is newly demonstrated in the die filling system; i.e., the DEM/SDF method is shown to be an effective method for the numerical simulation of particle flow into arbitrarily shaped dies.

    本文言語English
    ページ(範囲)791-809
    ページ数19
    ジャーナルChemical Engineering Science
    138
    DOI
    出版ステータスPublished - 2015 12 22

    ASJC Scopus subject areas

    • Chemical Engineering(all)
    • Chemistry(all)
    • Applied Mathematics
    • Industrial and Manufacturing Engineering

    フィンガープリント 「Numerical simulation of industrial die filling using the discrete element method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル