N‐way sectorial hybrid power divider design using boundary element method (invited article)

Moriyasu Miyazaki*, Osami Ishida, Tsutomu Hashimoto

*この研究の対応する著者

研究成果: Article査読

6 被引用数 (Scopus)

抄録

A design method of an N‐way sectorial hybrid power divider is described, using the boundary element method (BEM). Scattering parameters and current density distribution on the sectorial part are obtained by BEM analysis. Isolation among output ports is much improved by putting a resistive slot in the sectorial part and resistive sheets between the adjacent output lines. The design method is verified by the six‐way power divider, which has been developed in our laboratory. © 1993 John Wiley & Sons, Inc.

本文言語English
ページ(範囲)175-182
ページ数8
ジャーナルInternational Journal of RF and Microwave Computer-Aided Engineering
3
3
DOI
出版ステータスPublished - 1993 7月
外部発表はい

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「N‐way sectorial hybrid power divider design using boundary element method (invited article)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル