On a Heat Pipe using Liquid Mercury as Working Fluid

Tadashi Yamamoto, Katsuya Nagata, Masafumi Katsuta, Yoshio Ikeda

研究成果: Article査読

抄録

The purpose of this study is to collect basic data required for the development of mercury heat pipes operating in the temperature range of 350°C to 600°C, which will be used in the industrial field. For this purpose, three kinds of mercury heat pipes were made of stainless steel tubing (SUS 316L) having 25 mm in diameter and 1 000 mm in length. As a result of these tests, it was concluded that the mercury heat pipe exhibits good performance except during start-up, but the material compatibility of the stainless steel tubing and mercury is not very good.

本文言語English
ページ(範囲)2904-2911
ページ数8
ジャーナルNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
58
553
DOI
出版ステータスPublished - 1992
外部発表はい

ASJC Scopus subject areas

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「On a Heat Pipe using Liquid Mercury as Working Fluid」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル