One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics

Katsunori Yamaguchi, Shigeru Ueda, Takahiko Okura

研究成果: Conference contribution

抄録

This paper describes the new technologies for fixation of smelting So 2 gas as elemental sulphur and for converting gypsum to recycled calcium resource using waste organic materials. To produce nonferrous metals, the So2 gas is also generated from the raw materials such as sulphide or sulphate. A process that produces elemental sulphur from nonferrous smelter gas and waste plastics was investigated. Polyethylene was used as a deoxidiser of So2 gas in the present study. The conditions for reaction of So2 and polyethylene to make gas mixtures of H2S and So2 were calculated thermodynamically. The Claus reaction was applied to produce elemental sulphur from H2S and So2 gas mixture. More than 90 % sulphur recovered from So2 gas. A recycle of calcium resources as CaO or CaS from the waste gypsum was developed with a reduction process of the gypsum using plastics at high temperature. Reduction behaviour of CaSo 4 by polyethylene at temperature from 1,273 to 1,573 K was studied with gravimetry and X-ray diffraction analysis. From the experimental results, we found that complete reduction of CaSo4 to CaO can be done at the molar ratio more than 3/1 of CH2/CaSo4 for 2 h above 1,473 K, and increasing CaSo4-CH2 gas interface tend to advance the reduction of CaSo4.

元の言語English
ホスト出版物のタイトルProceedings - European Metallurgical Conference, EMC 2009
ページ267-278
ページ数12
1
出版物ステータスPublished - 2009
外部発表Yes
イベント5th European Metallurgical Conference, EMC 2009 - Innsbruck
継続期間: 2009 6 282009 7 1

Other

Other5th European Metallurgical Conference, EMC 2009
Innsbruck
期間09/6/2809/7/1

Fingerprint

Calcium Sulfate
Gypsum
Recycling
Gases
Plastics
Sulfur
Polyethylene
Polyethylenes
Gas mixtures
Calcium
Nonferrous metals
Gravimetric analysis
Smelting
Sulfides
X ray diffraction analysis
Sulfates
Raw materials
Temperature

ASJC Scopus subject areas

  • Metals and Alloys

これを引用

Yamaguchi, K., Ueda, S., & Okura, T. (2009). One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics. : Proceedings - European Metallurgical Conference, EMC 2009 (巻 1, pp. 267-278)

One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics. / Yamaguchi, Katsunori; Ueda, Shigeru; Okura, Takahiko.

Proceedings - European Metallurgical Conference, EMC 2009. 巻 1 2009. p. 267-278.

研究成果: Conference contribution

Yamaguchi, K, Ueda, S & Okura, T 2009, One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics. : Proceedings - European Metallurgical Conference, EMC 2009. 巻. 1, pp. 267-278, 5th European Metallurgical Conference, EMC 2009, Innsbruck, 09/6/28.
Yamaguchi K, Ueda S, Okura T. One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics. : Proceedings - European Metallurgical Conference, EMC 2009. 巻 1. 2009. p. 267-278
Yamaguchi, Katsunori ; Ueda, Shigeru ; Okura, Takahiko. / One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics. Proceedings - European Metallurgical Conference, EMC 2009. 巻 1 2009. pp. 267-278
@inproceedings{e883381dc2814fc693a186dce00da79b,
title = "One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics",
abstract = "This paper describes the new technologies for fixation of smelting So 2 gas as elemental sulphur and for converting gypsum to recycled calcium resource using waste organic materials. To produce nonferrous metals, the So2 gas is also generated from the raw materials such as sulphide or sulphate. A process that produces elemental sulphur from nonferrous smelter gas and waste plastics was investigated. Polyethylene was used as a deoxidiser of So2 gas in the present study. The conditions for reaction of So2 and polyethylene to make gas mixtures of H2S and So2 were calculated thermodynamically. The Claus reaction was applied to produce elemental sulphur from H2S and So2 gas mixture. More than 90 {\%} sulphur recovered from So2 gas. A recycle of calcium resources as CaO or CaS from the waste gypsum was developed with a reduction process of the gypsum using plastics at high temperature. Reduction behaviour of CaSo 4 by polyethylene at temperature from 1,273 to 1,573 K was studied with gravimetry and X-ray diffraction analysis. From the experimental results, we found that complete reduction of CaSo4 to CaO can be done at the molar ratio more than 3/1 of CH2/CaSo4 for 2 h above 1,473 K, and increasing CaSo4-CH2 gas interface tend to advance the reduction of CaSo4.",
keywords = "Calcium, Gypsum, Nonferrous metals, Recycling, Reduction process, So-gas, Waste organic materials, Waste plastics",
author = "Katsunori Yamaguchi and Shigeru Ueda and Takahiko Okura",
year = "2009",
language = "English",
isbn = "9783940276179",
volume = "1",
pages = "267--278",
booktitle = "Proceedings - European Metallurgical Conference, EMC 2009",

}

TY - GEN

T1 - One solution for resources recycling-reduction of So2 gas and Gypsum by waste plastics

AU - Yamaguchi, Katsunori

AU - Ueda, Shigeru

AU - Okura, Takahiko

PY - 2009

Y1 - 2009

N2 - This paper describes the new technologies for fixation of smelting So 2 gas as elemental sulphur and for converting gypsum to recycled calcium resource using waste organic materials. To produce nonferrous metals, the So2 gas is also generated from the raw materials such as sulphide or sulphate. A process that produces elemental sulphur from nonferrous smelter gas and waste plastics was investigated. Polyethylene was used as a deoxidiser of So2 gas in the present study. The conditions for reaction of So2 and polyethylene to make gas mixtures of H2S and So2 were calculated thermodynamically. The Claus reaction was applied to produce elemental sulphur from H2S and So2 gas mixture. More than 90 % sulphur recovered from So2 gas. A recycle of calcium resources as CaO or CaS from the waste gypsum was developed with a reduction process of the gypsum using plastics at high temperature. Reduction behaviour of CaSo 4 by polyethylene at temperature from 1,273 to 1,573 K was studied with gravimetry and X-ray diffraction analysis. From the experimental results, we found that complete reduction of CaSo4 to CaO can be done at the molar ratio more than 3/1 of CH2/CaSo4 for 2 h above 1,473 K, and increasing CaSo4-CH2 gas interface tend to advance the reduction of CaSo4.

AB - This paper describes the new technologies for fixation of smelting So 2 gas as elemental sulphur and for converting gypsum to recycled calcium resource using waste organic materials. To produce nonferrous metals, the So2 gas is also generated from the raw materials such as sulphide or sulphate. A process that produces elemental sulphur from nonferrous smelter gas and waste plastics was investigated. Polyethylene was used as a deoxidiser of So2 gas in the present study. The conditions for reaction of So2 and polyethylene to make gas mixtures of H2S and So2 were calculated thermodynamically. The Claus reaction was applied to produce elemental sulphur from H2S and So2 gas mixture. More than 90 % sulphur recovered from So2 gas. A recycle of calcium resources as CaO or CaS from the waste gypsum was developed with a reduction process of the gypsum using plastics at high temperature. Reduction behaviour of CaSo 4 by polyethylene at temperature from 1,273 to 1,573 K was studied with gravimetry and X-ray diffraction analysis. From the experimental results, we found that complete reduction of CaSo4 to CaO can be done at the molar ratio more than 3/1 of CH2/CaSo4 for 2 h above 1,473 K, and increasing CaSo4-CH2 gas interface tend to advance the reduction of CaSo4.

KW - Calcium

KW - Gypsum

KW - Nonferrous metals

KW - Recycling

KW - Reduction process

KW - So-gas

KW - Waste organic materials

KW - Waste plastics

UR - http://www.scopus.com/inward/record.url?scp=84875473511&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84875473511&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84875473511

SN - 9783940276179

VL - 1

SP - 267

EP - 278

BT - Proceedings - European Metallurgical Conference, EMC 2009

ER -