Open controller architecture - Past, present and future

G. Pritschow, Y. Altintas, F. Jovane, Y. Koren, M. Mitsuishi, Shozo Takata, H. Van Brussel, M. Weck, K. Yamazaki

研究成果: Article査読

163 被引用数 (Scopus)

抄録

Open Control Systems are the key enabler for the realization of modular and re-configurable manufacturing systems. The large number of special purpose machines and the high level of automation have led to an increasing importance of open control systems based on vendor neutral standards. This paper gives an overview on the past, present and future of Open Controller Architecture. After reflecting onthe different criteria, categories and characteristics of open controllers in general, the CNC products in the market are evaluated and an overview on the world-wide research activities in Europe, North America and Japan is given. Subsequently the efforts to harmonize the different results are described in order to establish e common world-wide standard in the future. Due to the "mix-and-match" nature of open controllers concentrated attention must be paid to testing mechanisms in the form of conformance and interoperability tests.

本文言語English
ページ(範囲)463-470
ページ数8
ジャーナルCIRP Annals - Manufacturing Technology
50
2
出版ステータスPublished - 2001
外部発表はい

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

フィンガープリント 「Open controller architecture - Past, present and future」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル