Optimization of horizontal well completion design

K. Furui, D. Zhu, A. D. Hill, E. R. Davis, B. R. Buck

研究成果: Paper査読

4 被引用数 (Scopus)

抄録

A well completion is a critical interface between the productive formation and the wellbore. An effective completion must maintain mechanical integrity of the borehole without creating any significant restrictions in the flow capacity of the well. In this paper, we outline a process to design optimal completions for horizontal wells by applying comprehensive skin factor models that include damage and turbulence effects for all common types of completions. Slotted or perforated liner, cased and perforated completions, or gravel pack completions have been used in horizontal wells for borehole stability and sand control purposes. However, these completions may have lower productivity (as characterized by a positive skin) relative to an equivalent openhole completion because the convergent flow to perforations or slots increases fluid velocity in the near-well vicinity. In addition, any reduced permeability zones (formation damage caused by drilling, completion, or other processes) magnify the convergent flow effects, and hence, may result in severe skin factors. Compound effects of formation damage around the well completion, a crushed zone due to perforating, the plugging of slots, and turbulent flow, as well as interactions among these effects are included in the model. We first illustrate how to use the skin factor models to screen the available completion types for different applications. This screening approach considers reservoir permeability, permeability anisotropy, fluid properties, formation damage effects, and rock mechanical characteristics as the key parameters. The types of completions that yield the most productive well performance for this matrix of properties are presented. A more detailed completion design is then illustrated by showing the use of the skin factor models for selection of liner completions for viscous oil reservoirs on the North Slope of Alaska. Application of the slotted or perforated liner models to the readily available liners showed that the completion skin factor can vary by as much as 40%, depending on the detailed characteristics of the slots or perforations in the liner (slot or perforation size, density, and distribution). This showed how analyzing the performance of the completion design can greatly increase well productivity at little or no cost.

本文言語English
ページ3259-3266
ページ数8
DOI
出版ステータスPublished - 2004 1 1
外部発表はい
イベント2004 SPE Annual Technical Conference and Exhibition - Houston, TX, United States
継続期間: 2004 9 262004 9 29

Other

Other2004 SPE Annual Technical Conference and Exhibition
CountryUnited States
CityHouston, TX
Period04/9/2604/9/29

ASJC Scopus subject areas

  • Fuel Technology
  • Energy Engineering and Power Technology

フィンガープリント 「Optimization of horizontal well completion design」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル