Optimization of preparation conditions of highly textured piezoelectric (Bi0.5K0.5)TiO3 ceramics

Gopal Prasad Khanal, Ichiro Fujii, Sangwook Kim, Shintaro Ueno, Tohru S. Suzuki, Satoshi Wada*


研究成果: Article査読

4 被引用数 (Scopus)


Layered titanate H1.08Ti1.73O4·nH2O (HTO) particles with plate-like morphology were used as a template for the fabrication of grain-oriented bismuth potassium titanate [(Bi0.5K0.5)TiO3, or BKT] ceramics by a reactive-templated grain growth method. Single perovskite-phase textured BKT ceramics were successfully fabricated with optimizing the preparation conditions such as mixing procedure of matrix and template particles with a binder solution, temperature programs for binder removal and sintering, and sintering conditions. Microstructure evaluation suggested that the sintering with or without weight-pressing and a temperature program used could significantly affect the degree of texture development. The debinding and sintering with weight-pressing helped on the proper alignment of oriented particles and/or grains along with promoting the growth of the oriented plate-like BKT particles, formed by an in situ topotactic transformation reaction of plate-like HTO templates, resulting in a high degree of orientation. Using optimum preparation conditions, single perovskite-phase BKT ceramics with grain-orientation over 85% were successfully fabricated for the first time via a conventional sintering method.

ジャーナルJournal of the Ceramic Society of Japan
出版ステータスPublished - 2019 6月

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 化学 (全般)
  • 凝縮系物理学
  • 材料化学


「Optimization of preparation conditions of highly textured piezoelectric (Bi0.5K0.5)TiO3 ceramics」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。