Over 1 A/mm drain current density and 3.6 W/mm output power density in 2DHG diamond MOSFETs with highly doped regrown source/drain

Ken Kudara*, Masakazu Arai, Yukiko Suzuki, Aoi Morishita, Jun Tsunoda, Atsushi Hiraiwa, Hiroshi Kawarada

*この研究の対応する著者

研究成果: Article査読

1 被引用数 (Scopus)

抄録

This paper reports the direct current and radio frequency characteristics of two-dimensional hole gas (2DHG) diamond metal-oxide-semiconductor field-effect transistors (MOSFETs) with microwave-plasma-chemical-vapor-deposition regrown P++-diamond (B ≈ 1 × 1022 cm−3) layers as their source and drain regions. To evaluate the ohmic contact resistance, two patterns of transmission line method were fabricated—one with P++-diamond/2DHG diamond interfaces and the other with only the P++-diamond layer. Three resistance components (metal/P++-diamond contact resistance (0.39 Ωmm), P++-diamond access resistance, and P++-diamond/2DHG contact resistance (∼0.65 Ω mm) were evaluated for the first time. The introduction of the P++-diamond ohmic contacts generated a drain current density of 1 A/mm and an output power density of 3.6 W/mm at a quiescent drain voltage (VDS, Q) of −50 V at 1 GHz; an output power of 1.7 W was achieved at a VDS, Q of −40 V at 1 GHz with a 1 mm gate width. These values were obtained in 2DHG diamond MOSFETs with a regrown P++-diamond layer with 1 μ m gate length. These results indicate that regrown P++-diamond has the potential to improve the drain current density and output power density of 2DHG diamond field-effect transistors.

本文言語English
ページ(範囲)220-228
ページ数9
ジャーナルCarbon
188
DOI
出版ステータスPublished - 2022 3月

ASJC Scopus subject areas

  • 化学 (全般)
  • 材料科学(全般)

フィンガープリント

「Over 1 A/mm drain current density and 3.6 W/mm output power density in 2DHG diamond MOSFETs with highly doped regrown source/drain」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル