Prediction, measurement and stabilization of structural deformation on orbit

Kosei Ishimura, A. Senba, T. Iwasa, Y. Ogi, T. Akita, H. Furuya, K. Minesugi

研究成果: Conference contribution

3 引用 (Scopus)

抄録

Requirement for shape stability of space structures such as barrel for space telescope tends to become more precisely. In addition to it, large size over 10 meters is sometimes required for such support structure to meet advanced science missions. To realize large and precise support structures, comprehensive techniques including prediction, measurement and stabilization techniques on orbit are needed. In this paper, we introduce some fundamental techniques to keep the precise shape for a slender box truss as a representative support structure. The structural deformation on orbit is induced by thermal distribution, disturbance (RW/MW/SAD etc.) and so on. At first, we analyzed temperature distribution and thermal distortion of the truss structure to predict the thermal deformation. The accuracy of analysis results is evaluated through experiments with a five-bay truss structure. Then, system identification is carried out to identify the stiffness of the structure because such identification of the stiffness becomes important for the precise prediction of thermal deformation in the case of indeterminate structure. As a first step, the stiffness matrix is identified by using particle swarm optimization method from the experimental data of natural frequency. By using the identified stiffness matrix, the natural frequency can be estimated within 1% error. At last, we attempt the shape control of truss structure by using artificial thermal expansion. It is experimentally shown that deformation of truss structure could be controlled with good accuracy, for example, within 30μm error for 1.9m height truss.

元の言語English
ホスト出版物のタイトル61st International Astronautical Congress 2010, IAC 2010
ページ6116-6121
ページ数6
8
出版物ステータスPublished - 2010 12 1
外部発表Yes
イベント61st International Astronautical Congress 2010, IAC 2010 - Prague
継続期間: 2010 9 272010 10 1

Other

Other61st International Astronautical Congress 2010, IAC 2010
Prague
期間10/9/2710/10/1

Fingerprint

Orbits
Stabilization
stabilization
orbits
stiffness matrix
Stiffness matrix
predictions
resonant frequencies
Natural frequencies
stiffness
Stiffness
shape control
Space telescopes
system identification
Particle swarm optimization (PSO)
Thermal expansion
boxes
thermal expansion
Identification (control systems)
Temperature distribution

ASJC Scopus subject areas

  • Aerospace Engineering
  • Astronomy and Astrophysics

これを引用

Ishimura, K., Senba, A., Iwasa, T., Ogi, Y., Akita, T., Furuya, H., & Minesugi, K. (2010). Prediction, measurement and stabilization of structural deformation on orbit. : 61st International Astronautical Congress 2010, IAC 2010 (巻 8, pp. 6116-6121)

Prediction, measurement and stabilization of structural deformation on orbit. / Ishimura, Kosei; Senba, A.; Iwasa, T.; Ogi, Y.; Akita, T.; Furuya, H.; Minesugi, K.

61st International Astronautical Congress 2010, IAC 2010. 巻 8 2010. p. 6116-6121.

研究成果: Conference contribution

Ishimura, K, Senba, A, Iwasa, T, Ogi, Y, Akita, T, Furuya, H & Minesugi, K 2010, Prediction, measurement and stabilization of structural deformation on orbit. : 61st International Astronautical Congress 2010, IAC 2010. 巻. 8, pp. 6116-6121, 61st International Astronautical Congress 2010, IAC 2010, Prague, 10/9/27.
Ishimura K, Senba A, Iwasa T, Ogi Y, Akita T, Furuya H その他. Prediction, measurement and stabilization of structural deformation on orbit. : 61st International Astronautical Congress 2010, IAC 2010. 巻 8. 2010. p. 6116-6121
Ishimura, Kosei ; Senba, A. ; Iwasa, T. ; Ogi, Y. ; Akita, T. ; Furuya, H. ; Minesugi, K. / Prediction, measurement and stabilization of structural deformation on orbit. 61st International Astronautical Congress 2010, IAC 2010. 巻 8 2010. pp. 6116-6121
@inproceedings{6dde39bcb37d40caaffa7cbb156b83d7,
title = "Prediction, measurement and stabilization of structural deformation on orbit",
abstract = "Requirement for shape stability of space structures such as barrel for space telescope tends to become more precisely. In addition to it, large size over 10 meters is sometimes required for such support structure to meet advanced science missions. To realize large and precise support structures, comprehensive techniques including prediction, measurement and stabilization techniques on orbit are needed. In this paper, we introduce some fundamental techniques to keep the precise shape for a slender box truss as a representative support structure. The structural deformation on orbit is induced by thermal distribution, disturbance (RW/MW/SAD etc.) and so on. At first, we analyzed temperature distribution and thermal distortion of the truss structure to predict the thermal deformation. The accuracy of analysis results is evaluated through experiments with a five-bay truss structure. Then, system identification is carried out to identify the stiffness of the structure because such identification of the stiffness becomes important for the precise prediction of thermal deformation in the case of indeterminate structure. As a first step, the stiffness matrix is identified by using particle swarm optimization method from the experimental data of natural frequency. By using the identified stiffness matrix, the natural frequency can be estimated within 1{\%} error. At last, we attempt the shape control of truss structure by using artificial thermal expansion. It is experimentally shown that deformation of truss structure could be controlled with good accuracy, for example, within 30μm error for 1.9m height truss.",
author = "Kosei Ishimura and A. Senba and T. Iwasa and Y. Ogi and T. Akita and H. Furuya and K. Minesugi",
year = "2010",
month = "12",
day = "1",
language = "English",
isbn = "9781617823688",
volume = "8",
pages = "6116--6121",
booktitle = "61st International Astronautical Congress 2010, IAC 2010",

}

TY - GEN

T1 - Prediction, measurement and stabilization of structural deformation on orbit

AU - Ishimura, Kosei

AU - Senba, A.

AU - Iwasa, T.

AU - Ogi, Y.

AU - Akita, T.

AU - Furuya, H.

AU - Minesugi, K.

PY - 2010/12/1

Y1 - 2010/12/1

N2 - Requirement for shape stability of space structures such as barrel for space telescope tends to become more precisely. In addition to it, large size over 10 meters is sometimes required for such support structure to meet advanced science missions. To realize large and precise support structures, comprehensive techniques including prediction, measurement and stabilization techniques on orbit are needed. In this paper, we introduce some fundamental techniques to keep the precise shape for a slender box truss as a representative support structure. The structural deformation on orbit is induced by thermal distribution, disturbance (RW/MW/SAD etc.) and so on. At first, we analyzed temperature distribution and thermal distortion of the truss structure to predict the thermal deformation. The accuracy of analysis results is evaluated through experiments with a five-bay truss structure. Then, system identification is carried out to identify the stiffness of the structure because such identification of the stiffness becomes important for the precise prediction of thermal deformation in the case of indeterminate structure. As a first step, the stiffness matrix is identified by using particle swarm optimization method from the experimental data of natural frequency. By using the identified stiffness matrix, the natural frequency can be estimated within 1% error. At last, we attempt the shape control of truss structure by using artificial thermal expansion. It is experimentally shown that deformation of truss structure could be controlled with good accuracy, for example, within 30μm error for 1.9m height truss.

AB - Requirement for shape stability of space structures such as barrel for space telescope tends to become more precisely. In addition to it, large size over 10 meters is sometimes required for such support structure to meet advanced science missions. To realize large and precise support structures, comprehensive techniques including prediction, measurement and stabilization techniques on orbit are needed. In this paper, we introduce some fundamental techniques to keep the precise shape for a slender box truss as a representative support structure. The structural deformation on orbit is induced by thermal distribution, disturbance (RW/MW/SAD etc.) and so on. At first, we analyzed temperature distribution and thermal distortion of the truss structure to predict the thermal deformation. The accuracy of analysis results is evaluated through experiments with a five-bay truss structure. Then, system identification is carried out to identify the stiffness of the structure because such identification of the stiffness becomes important for the precise prediction of thermal deformation in the case of indeterminate structure. As a first step, the stiffness matrix is identified by using particle swarm optimization method from the experimental data of natural frequency. By using the identified stiffness matrix, the natural frequency can be estimated within 1% error. At last, we attempt the shape control of truss structure by using artificial thermal expansion. It is experimentally shown that deformation of truss structure could be controlled with good accuracy, for example, within 30μm error for 1.9m height truss.

UR - http://www.scopus.com/inward/record.url?scp=79959451650&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79959451650&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:79959451650

SN - 9781617823688

VL - 8

SP - 6116

EP - 6121

BT - 61st International Astronautical Congress 2010, IAC 2010

ER -