Prediction of residual stress in grey cast iron

Experiment and analysis

Yuichi Motoyama, Hiroki Takahashi, Toshimitsu Okane, Yoya Fukuda, Makoto Yoshida

    研究成果: Conference contribution

    抄録

    This study showed that the thermal stress analysis for the stress lattice casting should use the element that is able to represent the bending deformation in principle for bending of the thin parts of the stress lattice. The thermal stress analysis successfully predicted the residual stress of the stress lattice due to the temperature difference between the thick and thin part with 11% difference using the second order tetrahedral element. However, the result of the simulation indicated that the magnitude of the residual stress due to the temperature difference in the cross section of the thick part was the same as that attributed to temperature difference between the thick and thin parts. This result indicated that the verification of the prediction accuracy of its residual stress must be conducted before applying the FEM to the prediction of the industrial casting residual stress.

    元の言語English
    ホスト出版物のタイトルMaterials Science and Technology Conference and Exhibition 2013, MS and T 2013
    ページ885-892
    ページ数8
    2
    出版物ステータスPublished - 2013
    イベントMaterials Science and Technology Conference and Exhibition 2013, MS and T 2013 - Montreal, QC
    継続期間: 2013 10 272013 10 31

    Other

    OtherMaterials Science and Technology Conference and Exhibition 2013, MS and T 2013
    Montreal, QC
    期間13/10/2713/10/31

    Fingerprint

    Cast iron
    Residual stresses
    Stress analysis
    Thermal stress
    Casting
    Experiments
    Temperature
    Finite element method

    ASJC Scopus subject areas

    • Mechanics of Materials

    これを引用

    Motoyama, Y., Takahashi, H., Okane, T., Fukuda, Y., & Yoshida, M. (2013). Prediction of residual stress in grey cast iron: Experiment and analysis. : Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (巻 2, pp. 885-892)

    Prediction of residual stress in grey cast iron : Experiment and analysis. / Motoyama, Yuichi; Takahashi, Hiroki; Okane, Toshimitsu; Fukuda, Yoya; Yoshida, Makoto.

    Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 巻 2 2013. p. 885-892.

    研究成果: Conference contribution

    Motoyama, Y, Takahashi, H, Okane, T, Fukuda, Y & Yoshida, M 2013, Prediction of residual stress in grey cast iron: Experiment and analysis. : Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 巻. 2, pp. 885-892, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, Montreal, QC, 13/10/27.
    Motoyama Y, Takahashi H, Okane T, Fukuda Y, Yoshida M. Prediction of residual stress in grey cast iron: Experiment and analysis. : Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 巻 2. 2013. p. 885-892
    Motoyama, Yuichi ; Takahashi, Hiroki ; Okane, Toshimitsu ; Fukuda, Yoya ; Yoshida, Makoto. / Prediction of residual stress in grey cast iron : Experiment and analysis. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 巻 2 2013. pp. 885-892
    @inproceedings{201d4d87ca144150a37890add3a6a1b6,
    title = "Prediction of residual stress in grey cast iron: Experiment and analysis",
    abstract = "This study showed that the thermal stress analysis for the stress lattice casting should use the element that is able to represent the bending deformation in principle for bending of the thin parts of the stress lattice. The thermal stress analysis successfully predicted the residual stress of the stress lattice due to the temperature difference between the thick and thin part with 11{\%} difference using the second order tetrahedral element. However, the result of the simulation indicated that the magnitude of the residual stress due to the temperature difference in the cross section of the thick part was the same as that attributed to temperature difference between the thick and thin parts. This result indicated that the verification of the prediction accuracy of its residual stress must be conducted before applying the FEM to the prediction of the industrial casting residual stress.",
    keywords = "Grey cast iron, Residual stress, Simulation",
    author = "Yuichi Motoyama and Hiroki Takahashi and Toshimitsu Okane and Yoya Fukuda and Makoto Yoshida",
    year = "2013",
    language = "English",
    isbn = "9781629933092",
    volume = "2",
    pages = "885--892",
    booktitle = "Materials Science and Technology Conference and Exhibition 2013, MS and T 2013",

    }

    TY - GEN

    T1 - Prediction of residual stress in grey cast iron

    T2 - Experiment and analysis

    AU - Motoyama, Yuichi

    AU - Takahashi, Hiroki

    AU - Okane, Toshimitsu

    AU - Fukuda, Yoya

    AU - Yoshida, Makoto

    PY - 2013

    Y1 - 2013

    N2 - This study showed that the thermal stress analysis for the stress lattice casting should use the element that is able to represent the bending deformation in principle for bending of the thin parts of the stress lattice. The thermal stress analysis successfully predicted the residual stress of the stress lattice due to the temperature difference between the thick and thin part with 11% difference using the second order tetrahedral element. However, the result of the simulation indicated that the magnitude of the residual stress due to the temperature difference in the cross section of the thick part was the same as that attributed to temperature difference between the thick and thin parts. This result indicated that the verification of the prediction accuracy of its residual stress must be conducted before applying the FEM to the prediction of the industrial casting residual stress.

    AB - This study showed that the thermal stress analysis for the stress lattice casting should use the element that is able to represent the bending deformation in principle for bending of the thin parts of the stress lattice. The thermal stress analysis successfully predicted the residual stress of the stress lattice due to the temperature difference between the thick and thin part with 11% difference using the second order tetrahedral element. However, the result of the simulation indicated that the magnitude of the residual stress due to the temperature difference in the cross section of the thick part was the same as that attributed to temperature difference between the thick and thin parts. This result indicated that the verification of the prediction accuracy of its residual stress must be conducted before applying the FEM to the prediction of the industrial casting residual stress.

    KW - Grey cast iron

    KW - Residual stress

    KW - Simulation

    UR - http://www.scopus.com/inward/record.url?scp=84893508648&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84893508648&partnerID=8YFLogxK

    M3 - Conference contribution

    SN - 9781629933092

    VL - 2

    SP - 885

    EP - 892

    BT - Materials Science and Technology Conference and Exhibition 2013, MS and T 2013

    ER -