Prediction of the maximum damaged part due to erosion-corrosion in pipes of chemical plants

Yoshimi Ueno, Kazunori Inoue, Shigeyuki Tateno, Hisayoshi Matsuyama

研究成果: Conference contribution

抄録

The maintenance strategy for pipelines of chemical plants has not been established because it requires a large number of inspections and some of them should be carried out at high and dangerous places. In order to establish the rational strategy, it is necessary to develop methodologies to concentrate inspection points on the maximum damaged parts of pipelines. In the case that piping management is carried out, there is a technology which measures the thickness of piping. This paper proposes a method to predict the maximum damaged part, due to erosion-corrosion by use of design and operation information. Then, in this paper, flow analysis is performed using the 3-dimensional heat fluid analysis software FLUENT. The simulation with FLUENT lias been calculated for the piping of the elbow shape to search for the place in the corrosion part where the progress of erosion-corrosion is the fastest in consideration of the influence of shear stress and pressure. As a result, it is clarified that the maximum damaged part can be predicted from design and operation information.

本文言語English
ホスト出版物のタイトル2006 SICE-ICASE International Joint Conference
ページ2846-2851
ページ数6
DOI
出版ステータスPublished - 2006 12 1
イベント2006 SICE-ICASE International Joint Conference - Busan, Korea, Republic of
継続期間: 2006 10 182006 10 21

出版物シリーズ

名前2006 SICE-ICASE International Joint Conference

Conference

Conference2006 SICE-ICASE International Joint Conference
国/地域Korea, Republic of
CityBusan
Period06/10/1806/10/21

ASJC Scopus subject areas

  • コンピュータ サイエンスの応用
  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「Prediction of the maximum damaged part due to erosion-corrosion in pipes of chemical plants」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル