Printability and structural analysis of Yttrium iron garnet thick film with low firing temperature

Intan Helina Hasan, Mohd Nizar Hamidon, Ismayadi Ismail, Rosiah Osman, Saman Azhari

研究成果: Conference contribution

4 被引用数 (Scopus)

抄録

This paper presents results of study on Yttrium iron garnet (YIG) thick film paste using linseed oil as organic binder. YIG nanopowder is mixed with organic vehicle which consists of linseed oil, m-xylene and α-terpineol. Samples with different ratios of compositions are prepared to study the printability and adhesion properties of the paste. Paste samples were then screen printed onto alumina substrate, dried and fired at 300°C. Microscopic images of the samples were observed to determine most suitable ratio for producing YIG paste. Based on the results, YIG paste with 30 wt% ratio showed good adhesion to the substrate as well as having high dielectric property compared to pastes with lower powder ratio.

本文言語English
ホスト出版物のタイトルRSM 2015 - 2015 IEEE Regional Symposium on Micro and Nano Electronics, Proceedings
出版社Institute of Electrical and Electronics Engineers Inc.
ISBN(電子版)9781479985500
DOI
出版ステータスPublished - 2015 12月 11
外部発表はい
イベント10th IEEE Regional Symposium on Micro and Nano Electronics, RSM 2015 - Kuala Terengganu, Malaysia
継続期間: 2015 8月 192015 8月 21

出版物シリーズ

名前RSM 2015 - 2015 IEEE Regional Symposium on Micro and Nano Electronics, Proceedings

Conference

Conference10th IEEE Regional Symposium on Micro and Nano Electronics, RSM 2015
国/地域Malaysia
CityKuala Terengganu
Period15/8/1915/8/21

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 器械工学
  • 電子工学および電気工学

フィンガープリント

「Printability and structural analysis of Yttrium iron garnet thick film with low firing temperature」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル