Project Overview of HTS Magnet for Ultra-high-field MRI System

Taizo Tosaka*, Hiroshi Miyazaki, Sadanori Iwai, Yasumi Otani, Masahiko Takahashi, Kenji Tasaki, Shunji Nomura, Tsutomu Kurusu, Hiroshi Ueda, So Noguchi, Atsushi Ishiyama, Shinichi Urayama, Hidenao Fukuyama

*この研究の対応する著者

研究成果: Conference article査読

14 被引用数 (Scopus)

抄録

A project to develop an ultra-high-field magnetic resonance imaging (MRI) system based on HTS magnets using (RE)Ba2Cu3O7 (REBCO; RE=rear earth) coils is underway. The project is supported by the Japanese Ministry of Economy, Trade and Industry and aims to establish magnet technologies for a whole-body 9.4 T MRI system. REBCO wires have high critical current density in high magnetic fields and high strength against hoop stresses, and therefore, MRI magnets using REBCO coils are expected to have cryogenic systems that are smaller, lighter, and simpler than the conventional ones. A major problem in using REBCO coils for MRI magnets is the huge irregular magnetic field generated by the screening current in REBCO tapes. Thus, the main purpose of this project is to make the influence of this screening current predictable and controllable. Fundamental technologies, including treatment of the screening currents, were studied via experiments and numerical simulations using small coils. Two types of model magnets are planned to be manufactured, and the knowledge gained in the development of the model magnets will be reflected in the magnet design of a whole-body 9.4 T MRI system.

本文言語English
ページ(範囲)217-220
ページ数4
ジャーナルPhysics Procedia
65
DOI
出版ステータスPublished - 2015
イベント27th International Symposium on Superconductivity, ISS 2014 - Tokyo, Japan
継続期間: 2014 11月 252014 11月 27

ASJC Scopus subject areas

  • 物理学および天文学(全般)

フィンガープリント

「Project Overview of HTS Magnet for Ultra-high-field MRI System」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル