Prompt response methods for a radiation detector

Y. Shirakawa*

*この研究の対応する著者

研究成果: Paper査読

抄録

The ionizing radiation survey meter is an indispensable radiation detector in case of the radiation accident or the nuclear accident, and it is used as a typical equipment in the daily radiation control of radiation facilities. The survey meter measures dose rate (mSv/h) or count rate (min-1, sec-1). In general, about 30 sec per each place is necessary for the measurement, and the time of about 60 sec per each place is necessary for a more accurate measurement. The method, which predicts the final value at the initial stage without waiting for the final response has been proposed for the rapid measurement.

本文言語English
ページ2155-2158
ページ数4
出版ステータスPublished - 2005 12 1
外部発表はい
イベントSICE Annual Conference 2005 - Okayama, Japan
継続期間: 2005 8 82005 8 10

Conference

ConferenceSICE Annual Conference 2005
国/地域Japan
CityOkayama
Period05/8/805/8/10

ASJC Scopus subject areas

  • 制御およびシステム工学
  • コンピュータ サイエンスの応用
  • 電子工学および電気工学

フィンガープリント

「Prompt response methods for a radiation detector」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル