Pulsed-DC electrophoretic deposition (EPD) of aqueous alumina suspension for controlling bubble incorporation and deposit microstructure

Laxmidhar Besra, Tetsuo Uchikoshi, Tohru S. Suzuki, Yoshio Sakka

研究成果: Article

6 引用 (Scopus)

抜粋

Electrophoretic deposition (EPD) from aqueous suspension generally forms deposit containing incorporated bubbles because of evolution of gases at electrodes due to electrolysis of water. We have demonstrated here that application of pulsed voltage /current instead of continuous DC enables controlling the amount of bubble incorporation and obtain bubble-free deposits during EPD of aqueous suspension. The yield and bubble incorporation decreased progressively with decrease in size of the applied pulse. A characteristic band of deposition window was found in the plot of voltage/current vs. pulse width within which smooth and bubble-free deposits are obtained. The window is wider at low applied voltages/currents than at higher voltages/currents implying that it is more easier to control the pulsed EPD at lower applied voltages and/currents. No deposition occurred below the window whereas deposits with incorporated bubbles formed above the window. Suppression of bubbles with decreasing pulse size was attributed to decrease in the amount of hydrogen evolved per pulse and verified by monitoring the gain in weight of palladium (Pd) electrode used as cathode during electrolysis of water.

元の言語English
ページ(範囲)39-44
ページ数6
ジャーナルKey Engineering Materials
412
DOI
出版物ステータスPublished - 2009
外部発表Yes

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Pulsed-DC electrophoretic deposition (EPD) of aqueous alumina suspension for controlling bubble incorporation and deposit microstructure' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用