Quench detection and protection of cryocooler-cooled YBCO pancake coil for SMES

Hiroshi Ueda, Atsushi Ishiyama, Kazuki Muromachi, Takahiro Suzuki, Koji Shikimachi, Naoki Hirano, Shigeo Nagaya

    研究成果: Article

    8 引用 (Scopus)

    抄録

    In this paper, we focus on the quench detection and protection of a cryocooler-cooled pancake coil for SMES wound with a YBCO bundle conductor composed of laminated electrically insulated YBCO-coated conductors. Because the normal-zone propagation velocity is much slower in a high-temperature superconducting (HTS) coil than in a low-temperature superconducting (LTS) coil, the detection of the non-recovering normal zone using a voltage signal is quite difficult. Quench detection is considered to be more difficult during SMES operation because of the noise of the converter or other equipment. Therefore, a quench must be detected using some other method. In the previous paper, we showed that a quench in the coil could be detected by observing the transposition of the current in the bundle conductor caused by local normal transition. In this paper, based on this quench detection method, we investigate the transposition of current and the thermal behavior during the quench detection and the dumping of the stored energy by an external resistance in coils wound with a YBCO laminated bundle conductor for SMES and determine the appropriate stabilizer thickness of the YBCO-coated conductors.

    元の言語English
    記事番号4702804
    ジャーナルIEEE Transactions on Applied Superconductivity
    22
    発行部数3
    DOI
    出版物ステータスPublished - 2012

    Fingerprint

    coils
    conductors
    bundles
    Temperature
    Electric potential
    dumping
    propagation velocity
    converters
    Superconducting coils
    electric potential
    Hot Temperature
    energy

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Condensed Matter Physics
    • Electronic, Optical and Magnetic Materials

    これを引用

    Quench detection and protection of cryocooler-cooled YBCO pancake coil for SMES. / Ueda, Hiroshi; Ishiyama, Atsushi; Muromachi, Kazuki; Suzuki, Takahiro; Shikimachi, Koji; Hirano, Naoki; Nagaya, Shigeo.

    :: IEEE Transactions on Applied Superconductivity, 巻 22, 番号 3, 4702804, 2012.

    研究成果: Article

    Ueda, Hiroshi ; Ishiyama, Atsushi ; Muromachi, Kazuki ; Suzuki, Takahiro ; Shikimachi, Koji ; Hirano, Naoki ; Nagaya, Shigeo. / Quench detection and protection of cryocooler-cooled YBCO pancake coil for SMES. :: IEEE Transactions on Applied Superconductivity. 2012 ; 巻 22, 番号 3.
    @article{21df64b886854b278a0b4c99b582e5e5,
    title = "Quench detection and protection of cryocooler-cooled YBCO pancake coil for SMES",
    abstract = "In this paper, we focus on the quench detection and protection of a cryocooler-cooled pancake coil for SMES wound with a YBCO bundle conductor composed of laminated electrically insulated YBCO-coated conductors. Because the normal-zone propagation velocity is much slower in a high-temperature superconducting (HTS) coil than in a low-temperature superconducting (LTS) coil, the detection of the non-recovering normal zone using a voltage signal is quite difficult. Quench detection is considered to be more difficult during SMES operation because of the noise of the converter or other equipment. Therefore, a quench must be detected using some other method. In the previous paper, we showed that a quench in the coil could be detected by observing the transposition of the current in the bundle conductor caused by local normal transition. In this paper, based on this quench detection method, we investigate the transposition of current and the thermal behavior during the quench detection and the dumping of the stored energy by an external resistance in coils wound with a YBCO laminated bundle conductor for SMES and determine the appropriate stabilizer thickness of the YBCO-coated conductors.",
    keywords = "Normal propagation, protection, stability, YBCO bundle conductor",
    author = "Hiroshi Ueda and Atsushi Ishiyama and Kazuki Muromachi and Takahiro Suzuki and Koji Shikimachi and Naoki Hirano and Shigeo Nagaya",
    year = "2012",
    doi = "10.1109/TASC.2011.2174578",
    language = "English",
    volume = "22",
    journal = "IEEE Transactions on Applied Superconductivity",
    issn = "1051-8223",
    publisher = "Institute of Electrical and Electronics Engineers Inc.",
    number = "3",

    }

    TY - JOUR

    T1 - Quench detection and protection of cryocooler-cooled YBCO pancake coil for SMES

    AU - Ueda, Hiroshi

    AU - Ishiyama, Atsushi

    AU - Muromachi, Kazuki

    AU - Suzuki, Takahiro

    AU - Shikimachi, Koji

    AU - Hirano, Naoki

    AU - Nagaya, Shigeo

    PY - 2012

    Y1 - 2012

    N2 - In this paper, we focus on the quench detection and protection of a cryocooler-cooled pancake coil for SMES wound with a YBCO bundle conductor composed of laminated electrically insulated YBCO-coated conductors. Because the normal-zone propagation velocity is much slower in a high-temperature superconducting (HTS) coil than in a low-temperature superconducting (LTS) coil, the detection of the non-recovering normal zone using a voltage signal is quite difficult. Quench detection is considered to be more difficult during SMES operation because of the noise of the converter or other equipment. Therefore, a quench must be detected using some other method. In the previous paper, we showed that a quench in the coil could be detected by observing the transposition of the current in the bundle conductor caused by local normal transition. In this paper, based on this quench detection method, we investigate the transposition of current and the thermal behavior during the quench detection and the dumping of the stored energy by an external resistance in coils wound with a YBCO laminated bundle conductor for SMES and determine the appropriate stabilizer thickness of the YBCO-coated conductors.

    AB - In this paper, we focus on the quench detection and protection of a cryocooler-cooled pancake coil for SMES wound with a YBCO bundle conductor composed of laminated electrically insulated YBCO-coated conductors. Because the normal-zone propagation velocity is much slower in a high-temperature superconducting (HTS) coil than in a low-temperature superconducting (LTS) coil, the detection of the non-recovering normal zone using a voltage signal is quite difficult. Quench detection is considered to be more difficult during SMES operation because of the noise of the converter or other equipment. Therefore, a quench must be detected using some other method. In the previous paper, we showed that a quench in the coil could be detected by observing the transposition of the current in the bundle conductor caused by local normal transition. In this paper, based on this quench detection method, we investigate the transposition of current and the thermal behavior during the quench detection and the dumping of the stored energy by an external resistance in coils wound with a YBCO laminated bundle conductor for SMES and determine the appropriate stabilizer thickness of the YBCO-coated conductors.

    KW - Normal propagation

    KW - protection

    KW - stability

    KW - YBCO bundle conductor

    UR - http://www.scopus.com/inward/record.url?scp=84862530716&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84862530716&partnerID=8YFLogxK

    U2 - 10.1109/TASC.2011.2174578

    DO - 10.1109/TASC.2011.2174578

    M3 - Article

    AN - SCOPUS:84862530716

    VL - 22

    JO - IEEE Transactions on Applied Superconductivity

    JF - IEEE Transactions on Applied Superconductivity

    SN - 1051-8223

    IS - 3

    M1 - 4702804

    ER -