Recognition of constitution/configuration and workability judgment for the modular manipulator system, TOMMS

研究成果: Paper査読

抄録

A design concept of TOMMS, TOshiba Modular Manipulator System, has been already proposed to achieve a modular manipulator system which can be assembled into any desired constitution and configuration to provide adaptability to tasks, using as few kinds and types of modules as possible, without special handling such as modification of control software. To realize the concept, we developed a constitution and configuration recognition method of the assembled manipulator using electric resistance which is simple, practical and reliable. Moreover, we developed a workability judgment method considering the degeneracy of degrees of freedom (d.o.f.) of the manipulator and the conditions of the desired task. These methods were applied to the trial system TOMMS-1 and their efficiency and practicality were confirmed.

本文言語English
ページ493-500
ページ数8
出版ステータスPublished - 1996 12 1
外部発表はい
イベントProceedings of the 1996 IEEE 22nd International Conference on Industrial Electronics, Control, and Instrumentation, IECON. Part 3 (of 3) - Taipei, Taiwan
継続期間: 1996 8 51996 8 10

Other

OtherProceedings of the 1996 IEEE 22nd International Conference on Industrial Electronics, Control, and Instrumentation, IECON. Part 3 (of 3)
CityTaipei, Taiwan
Period96/8/596/8/10

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

フィンガープリント 「Recognition of constitution/configuration and workability judgment for the modular manipulator system, TOMMS」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル