Removal of cesium using cobalt-ferrocyanide-impregnated polymer-chain-grafted fibers

Ryo Ishihara, Kunio Fujiwara, Takato Harayama, Yusuke Okamura, Shoichiro Uchiyama, Mai Sugiyama, Taka Aki Someya, Wataru Amakai, Satoshi Umino, Tsubasa Ono, Aguru Nide, Yuya Hirayama, Tsukasa Baba, Takashi Kojima, Daisuke Umeno, Kyoichi Saito*, Shiho Asai, Takanobu Sugo

*この研究の対応する著者

研究成果: Article査読

52 被引用数 (Scopus)

抄録

A novel fiber that can immobilize metal ferrocyanides for the removal of cesium ions using a commercially available 6-nylon fiber as a starting material was proposed. Precipitates of metal ferrocyanide (M-FC) were formed among the polymer chains grafted onto the 6-nylon fiber. 6-Nylon fiber of 40 μm diameter was used as the trunk polymer for grafting. Vinyl benzyl trimethylammonium chloride (VBTAC) and Sodium styrene sulfonate (SSS) were used without further purification. Cesium chloride was dissolved with seawater to yield a concentration of 10 mg-Cs/L. Nylon fiber or 6-nylon fiber was irradiated with an electron beam in nitrogen atmosphere at ambient temperature. After the fibers were immersed in a 1.0M NaCl aqueous solution and washed repeatedly with water, they were vacuum-dried. The results show that the uniform Fe or ferrocyanide distribution across the ferrocyanide-ion-bound VBTAC fiber corresponds to the uniform distribution of the poly-VBTAC chain grafted to the nylon fiber.

本文言語English
ページ(範囲)1281-1284
ページ数4
ジャーナルJournal of Nuclear Science and Technology
48
10
DOI
出版ステータスPublished - 2011
外部発表はい

ASJC Scopus subject areas

  • 核物理学および高エネルギー物理学
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Removal of cesium using cobalt-ferrocyanide-impregnated polymer-chain-grafted fibers」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル