Risk based selection of inspection parts for surface corrosion of piping in chemical plants

Kotaro Hamano, Akira Kamaga, Shigeyuki Tateno, Hisayoshi Matsuyama

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

Recently, corrosion of piping of petrochemical plants has been a problem. Apparatuses which degenerate comparatively fast are inspected periodically, while piping lias been overlooked since the corrosion rate is very slow. However, there is a danger that the corrosion of the piping causes leakage of internal fluid because the piping has been used for a long time. Inspection of piping needs enormous works like removal of heat insulation material around the piping. There are some problems to carry out the inspection such as cost, time and danger for workers. This research supports decision-making on selection of inspection parts in order to reduce these problems. Although the inspection parts exist innumerably in large scale plants, this system can presume the parts required inspection and improve the hitting ratio of the inspection parts. The performance of proposed system which uses graph theory to decide the partial order relation of each of inspection parts is successfully demonstrated by using an actual case database.

本文言語English
ホスト出版物のタイトル2006 SICE-ICASE International Joint Conference
ページ3408-3413
ページ数6
DOI
出版ステータスPublished - 2006 12 1
イベント2006 SICE-ICASE International Joint Conference - Busan, Korea, Republic of
継続期間: 2006 10 182006 10 21

出版物シリーズ

名前2006 SICE-ICASE International Joint Conference

Conference

Conference2006 SICE-ICASE International Joint Conference
国/地域Korea, Republic of
CityBusan
Period06/10/1806/10/21

ASJC Scopus subject areas

  • コンピュータ サイエンスの応用
  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「Risk based selection of inspection parts for surface corrosion of piping in chemical plants」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル