Selective droplet sampling flow system using minimum number of horizontal pneumatic valves formed by single step PDMS molding

D. H. Yoon, D. Wakui, T. Sekiguchi, S. Shoji

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

Selective droplet sampling system which can deliver target droplets to five different chambers is realized by pneumatically controlled horizontal PDMS microvalves. One inlet and five outlets sorting are performed by only two pneumatic valves using the high aspect ratio flexible parallel PDMS wall structures. Selective droplets sampling is obtained with outlet flow resistance control by deformable horizontal microvalves and walls. The proposed simple flow control structure enables total flow system with simple fabrication by a single PDMS molding. The sampling was performed within 1 second under pneumatic pressure from 0 kPa to 250 kPa.

本文言語English
ホスト出版物のタイトル14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010
ページ1085-1087
ページ数3
出版ステータスPublished - 2010 12 1
イベント14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010 - Groningen, Netherlands
継続期間: 2010 10 32010 10 7

出版物シリーズ

名前14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010
2

Conference

Conference14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010
CountryNetherlands
CityGroningen
Period10/10/310/10/7

ASJC Scopus subject areas

  • Control and Systems Engineering

フィンガープリント 「Selective droplet sampling flow system using minimum number of horizontal pneumatic valves formed by single step PDMS molding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル