Size controllable polymeric microlens fabrication by using a multiphase droplet including air core

D. H. Yoon*, T. Arakawa, J. S. Go, S. Shoji

*この研究の対応する著者

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

Polymeric microlenses of controllable size and radius of curvature were fabricated by a simple micro fluidic device. Positive meniscus microlenses were formed from the microdroplets including air core. The dimensions of the lens were controlled by fluidic conditions of droplet formation. Especially, air core and organic phase volumes control the diameter and curvature of the microlenses. Controllable sizes from 114 μm to 261 μm in diameter and radiuses of curvature from 61 μm to 357 μm are achieved. The proposed method is applicable for a high throughput microlens production.

本文言語English
ホスト出版物のタイトル14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010
ページ1118-1120
ページ数3
出版ステータスPublished - 2010 12月 1
イベント14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010 - Groningen, Netherlands
継続期間: 2010 10月 32010 10月 7

出版物シリーズ

名前14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010
2

Conference

Conference14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010
国/地域Netherlands
CityGroningen
Period10/10/310/10/7

ASJC Scopus subject areas

  • 制御およびシステム工学

フィンガープリント

「Size controllable polymeric microlens fabrication by using a multiphase droplet including air core」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル