Spatial resolution of a cable fault location attempt by frequency domain reflectometry

研究成果: Paper

抄録

We have demonstrated that frequency domain reflectometry (FDR) can locate the position of degradation or abnormality in a cable with the assistance of inverse fast-Fourier transform (IFFT). Although it is easily understandable that this FDR-IFFT method can be applied for a location attempt of a cable with more than one abnormality, we have not demonstrated this so well experimentally. Therefore, we heated two different positions on a coaxial cable of 31.5 m insulated with low-density polyethylene using two heating chambers with an effective chamber width of around 45 cm set at positions 19.7 and 24.7 m from the cable end connected to the analyzer. As a result, it is clearly indicated that the two positions can be located if we heated there only by 10 °C. In addition, the two positions at which the cable enters and goes out of the heating chamber can be recognized clearly. This means that the FDR-IFFT method we are developing exhibits a good spatial resolution in a way that the two positions with a mutual distance of 45 cm are clearly recognizable.

本文言語English
ページ845-851
ページ数7
出版ステータスPublished - 2019
イベント19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, EnvDeg 2019 - Boston, United States
継続期間: 2019 8 182019 8 22

Conference

Conference19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, EnvDeg 2019
CountryUnited States
CityBoston
Period19/8/1819/8/22

ASJC Scopus subject areas

  • Nuclear Energy and Engineering
  • Pollution

フィンガープリント 「Spatial resolution of a cable fault location attempt by frequency domain reflectometry」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル