Stand-alone micro fluidic system using partly disposable PDMS microwell array for high throughput cell analysis

Kasumi Miyamoto, Ryo Yamamoto, Kentaro Kawai, Shuichi Shoji

研究成果: Conference contribution

抄録

A stand-alone microfluidic system consists of a reusable flow control part and a disposable microwell array for high throughput cell analysis is proposed. The flow control part is realized with addressable microvalve array driven by compactly-fabricated solenoid actuators and EOF micropumps. Disposable 16 microwell array with 4 reagent injection ports was fabricated using a PDMS structure. The disposable fluidic chip can be easily replaced to different functional fluidic networks depended on their actual uses. The prototype system with 2×5 (52) on-chip hydraulic valves that are driven by 10 (25) solenoid actuators was fabricated. Precise reagent injection of ten-nanoliter order to each microwell was successfully carried out.

本文言語English
ホスト出版物のタイトル2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11
ページ2944-2947
ページ数4
DOI
出版ステータスPublished - 2011
イベント2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11 - Beijing, China
継続期間: 2011 6 52011 6 9

出版物シリーズ

名前2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11

Conference

Conference2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11
CountryChina
CityBeijing
Period11/6/511/6/9

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

フィンガープリント 「Stand-alone micro fluidic system using partly disposable PDMS microwell array for high throughput cell analysis」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル