Statics of Pin Corona Charger in Electrophotography

Hiroyuki Kawamoto, Kosuke Takasaki, Hiromu Yasuda, Naohiro Kumagai

    研究成果: Conference contribution

    1 引用 (Scopus)

    抜粋

    The electrostatic force acting on a pin electrode in a pin-to-plate corona discharge system was measured and numerically calculated by a static unipolar model. The model neglects the effects of diffusion and convection of charged particles. It is assumed that generation of ions takes place on a tip of the pin electrode and that surface electric field is less than the onset field of corona discharge. Numerical calculations were conducted using an iterative finite element method. Calculated voltage-current characteristics of the positive corona qualitatively agreed with the measured result that the corona discharge took place over a threshold voltage and the current was in the order of several ten microamperes. Trichel pulse was observed in case of negative corona and the negative corona current was large compared to the positive corona. Vertical electrostatic force was also measured and calculated. Although extremely small electrostatic pull force was induced if discharge did not take place, the force became repulsive and relatively large when the corona discharge took place. Force in negative corona was almost same with that in positive corona. Calculated force without discharge agreed with the measured but the calculation did not simulate repulsive characteristics at corona discharging. Convection of air must be included in the model. Effect of lean of the pin electrode has been also investigated. The present investigation is expected not only to realize a new ozone-free charger but also to clarify quantitative mechanisms of the bead carry-out in the magnetic brush development subsystem of electrophotography. In addition to these technologies related to the electrophotography, a unique method to drive liquid, named "electrostatic Moses effect," has found and reported. The method is expected to be utilized for a new ink jet printhead.

    元の言語English
    ホスト出版物のタイトルInternational Conference on Digital Printing Technologies
    ページ827-835
    ページ数9
    出版物ステータスPublished - 2000
    イベントIS and T's NIP16: International Conference on Digital Printing Technologies - Vancouver, BC
    継続期間: 2000 10 152000 10 20

    Other

    OtherIS and T's NIP16: International Conference on Digital Printing Technologies
    Vancouver, BC
    期間00/10/1500/10/20

    ASJC Scopus subject areas

    • Media Technology

    フィンガープリント Statics of Pin Corona Charger in Electrophotography' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Kawamoto, H., Takasaki, K., Yasuda, H., & Kumagai, N. (2000). Statics of Pin Corona Charger in Electrophotography. : International Conference on Digital Printing Technologies (pp. 827-835)