Study on gas seal configuration for molten carbonate fuel cells

Takao Nakagaki, Hideaki Nameki, Haruhiko Hirata, Michio Hori

研究成果: Article査読

抄録

Molten carbonate fuel cells (MCFCs) are expected to be large-scale, highly efficient energy sources in the future. A reactant gas seal is one of the critical issues in achievement of reliability of the MCFC stack, which is a key piece of equipment in an MCFC power plant. At present, the wet gas seal with carbonate molten at the operating temperature (650 °C) is generally considered to be suitable as such a seal. On the other hand, to be cost-competitive with existing power plants, the MCFC stack must consist almost entirely of thin sheet metal parts. In this report, a wet gas seal configuration composed of thin sheet metal parts is proposed. Then, the long-term performance of the wet gas seal in an actual MCFC is evaluated.

本文言語English
ページ(範囲)241-246
ページ数6
ジャーナルNippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
63
616
出版ステータスPublished - 1997 12 1
外部発表はい

ASJC Scopus subject areas

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Study on gas seal configuration for molten carbonate fuel cells」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル