Study on process planning system for holonic manufacturing (3rd report, process planning considering machining schedules)

Nobuhiro Sugimura, Rajesh Shrestha, Yoshitaka Tanimizu, Koji Iwamura

研究成果: Article

1 引用 (Scopus)

抄録

New architectures of manufacturing systems have been proposed aiming at realizing more flexible control structures of manufacturing systems which can cope with dynamic changes in volume and variety of products. They are so called as holonic manufacturing systems, autonomous distributed manufacturing systems, random manufacturing systems and biological manufacturing systems. The objective of the present research is to develop an integrated process planning and scheduling system which is applicable to the holonic manufacturing systems. In the previous paper, a systematic method is proposed to select suitable sequences of machining equipment, by applying the genetic algorithm (GA) and the dynamic programming (DP) methods. The method is extended, in the present paper, to consider the production schedules of the machining equipment.

元の言語English
ページ(範囲)2469-2475
ページ数7
ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
70
発行部数8
出版物ステータスPublished - 2004 8 1
外部発表Yes

Fingerprint

Process planning
Machining
Dynamic programming
Genetic algorithms
Scheduling

ASJC Scopus subject areas

  • Mechanical Engineering

これを引用

@article{892eb0429f7747a6ba02dcbc2dd16ca0,
title = "Study on process planning system for holonic manufacturing (3rd report, process planning considering machining schedules)",
abstract = "New architectures of manufacturing systems have been proposed aiming at realizing more flexible control structures of manufacturing systems which can cope with dynamic changes in volume and variety of products. They are so called as holonic manufacturing systems, autonomous distributed manufacturing systems, random manufacturing systems and biological manufacturing systems. The objective of the present research is to develop an integrated process planning and scheduling system which is applicable to the holonic manufacturing systems. In the previous paper, a systematic method is proposed to select suitable sequences of machining equipment, by applying the genetic algorithm (GA) and the dynamic programming (DP) methods. The method is extended, in the present paper, to consider the production schedules of the machining equipment.",
keywords = "Holonic Manufacturing System, Machining Sequence, Process Planning, Production Schedules, Production System",
author = "Nobuhiro Sugimura and Rajesh Shrestha and Yoshitaka Tanimizu and Koji Iwamura",
year = "2004",
month = "8",
day = "1",
language = "English",
volume = "70",
pages = "2469--2475",
journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",
issn = "0387-5024",
publisher = "Japan Society of Mechanical Engineers",
number = "8",

}

TY - JOUR

T1 - Study on process planning system for holonic manufacturing (3rd report, process planning considering machining schedules)

AU - Sugimura, Nobuhiro

AU - Shrestha, Rajesh

AU - Tanimizu, Yoshitaka

AU - Iwamura, Koji

PY - 2004/8/1

Y1 - 2004/8/1

N2 - New architectures of manufacturing systems have been proposed aiming at realizing more flexible control structures of manufacturing systems which can cope with dynamic changes in volume and variety of products. They are so called as holonic manufacturing systems, autonomous distributed manufacturing systems, random manufacturing systems and biological manufacturing systems. The objective of the present research is to develop an integrated process planning and scheduling system which is applicable to the holonic manufacturing systems. In the previous paper, a systematic method is proposed to select suitable sequences of machining equipment, by applying the genetic algorithm (GA) and the dynamic programming (DP) methods. The method is extended, in the present paper, to consider the production schedules of the machining equipment.

AB - New architectures of manufacturing systems have been proposed aiming at realizing more flexible control structures of manufacturing systems which can cope with dynamic changes in volume and variety of products. They are so called as holonic manufacturing systems, autonomous distributed manufacturing systems, random manufacturing systems and biological manufacturing systems. The objective of the present research is to develop an integrated process planning and scheduling system which is applicable to the holonic manufacturing systems. In the previous paper, a systematic method is proposed to select suitable sequences of machining equipment, by applying the genetic algorithm (GA) and the dynamic programming (DP) methods. The method is extended, in the present paper, to consider the production schedules of the machining equipment.

KW - Holonic Manufacturing System

KW - Machining Sequence

KW - Process Planning

KW - Production Schedules

KW - Production System

UR - http://www.scopus.com/inward/record.url?scp=8344254421&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=8344254421&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:8344254421

VL - 70

SP - 2469

EP - 2475

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 8

ER -