Surface Change of Polyamide Nanocomposite Caused by Partial Discharges

Masahiro Kozako, Norikazu Fuse, Kohei Shibata, Naoshi Hirai, Yoshimichi Ohki, Tatsuki Okamoto, Toshikatsu Tanaka

研究成果: Conference article査読

45 被引用数 (Scopus)

抄録

We have investigated partial discharge (PD) degradation for conventional polyamide-6 without nanoscale fillers (nanofillers) and polyamide-6 nanocomposites with 2 weight (wt) %, 4 wt% and 5 wt% addition. Such materials were subjected to partial discharge under the IEC (b) electrode configuration for evaluation. Comparisons were made as to the surface roughness observed by scanning electron microscopy and atomic force microscopy. It was found that the change in the surface roughness was far smaller in specimens with nanofillers than those without nanofillers, and that the 2 wt% addition was sufficient for improvement. This result indicates that polyamide-6 nanocomposite is more resistive to PDs than polyamide 6 without nanofillers.

本文言語English
ページ(範囲)75-78
ページ数4
ジャーナルConference on Electrical Insulation and Dielectric Phenomena (CEIDP), Annual Report
出版ステータスPublished - 2003 11 21
イベント2003 Annual Report: Conference on Electrical Insulation and Dieletric Phenomena - Albuquerque, NM, United States
継続期間: 2003 10 192003 10 22

ASJC Scopus subject areas

  • Building and Construction
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

フィンガープリント 「Surface Change of Polyamide Nanocomposite Caused by Partial Discharges」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル