Synthesis of 16 quadrature amplitude modulation using polarization- multiplexing QPSK modulator

Isao Morohashi*, Takahide Sakamoto, Masaaki Sudo, Atsushi Kanno, Akito Chiba, Junichiro Ichikawa, Tetsuya Kawanishi

*この研究の対応する著者

研究成果: Article査読

3 被引用数 (Scopus)

抄録

We propose a polarization-multiplexing QPSK modulator for synthesis of a 16 QAM signal. The generation mechanism of 16 QAM is based on an electro-optic vector digital-to-analog converter, which can generate optical multilevel signals from binary electric data sequences. A quad-parallel Mach-Zehnder modulator (QPMZM) used in our previous research requires precise control of electric signals or fabrication of a variable optical attenuator, which significantly raises the degree of difficulty to control electric signals or device fabrication. To overcome this difficulty, we developed the polarization-multiplexing QPSK modulator, which improved the method of superposition of QPSK signals. In the polarizationmultiplexing QPSK modulator, two QPSK signals are output with orthogonal polarization and superposed through a polarizer. The amplitude ratio between the two QPSK signals can be precisely controlled by rotating the polarizer to arrange the 16 symbols equally. Generation of 16 QAM with 40 Gb/s and a bit error rate of 5.69 × 10 -5 was successfully demonstrated using the polarization-multiplexing QPSK modulator. This modulator has simpler configuration than the previous one, utilized a dual-polarization MZM, alleviating complicated control of electric signals.

本文言語English
ページ(範囲)1809-1814
ページ数6
ジャーナルIEICE Transactions on Communications
E94-B
7
DOI
出版ステータスPublished - 2011 7
外部発表はい

ASJC Scopus subject areas

  • ソフトウェア
  • コンピュータ ネットワークおよび通信
  • 電子工学および電気工学

フィンガープリント

「Synthesis of 16 quadrature amplitude modulation using polarization- multiplexing QPSK modulator」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル