Tangential momentum accommodation coefficient measurements for various materials and gas species

H. Yamaguchi, Y. Matsuda, T. Niimi

研究成果: Conference article査読

10 被引用数 (Scopus)

抄録

The tangential momentum accommodation coefficient was measured from the gaseous flow through a single microtube. The mass flow rate was measured by the constant volume technique, where the rate is related to time rate of pressure variation in a fixed volume tank. The measured mass flow rate was fitted by the theoretical mass flow rate expressed by the slip velocity at the surface to deduce the slip coefficient, which can be related to the tangential accommodation coefficient. The mean Knudsen number, which is determined as the mean pressure of the inlet and the outlet, was set to be below 0.32, where the second-order slip boundary condition was suggested to be valid. The measurement system was designed to allow using a microtube with large diameter of several hundred micrometers. Since low pressure environment was essential for large Knudsen number condition for the flow through such large microtube, a low leakage measurement system realized by applying the UHV technology is needed. Applicability of sub millimeters size microtubes allowed us to measure the tangential momentum accommodation coefficients on various materials. In this study, we measured the tangential momentum accommodation coefficients on an engineering metal surface for various gas species.

本文言語English
論文番号012035
ジャーナルJournal of Physics: Conference Series
362
1
DOI
出版ステータスPublished - 2012 1 1
外部発表はい
イベント1st European Conference on Gas Micro Flows, GasMems 2012 - Skiathos, Greece
継続期間: 2012 6 62012 6 8

ASJC Scopus subject areas

  • Physics and Astronomy(all)

フィンガープリント 「Tangential momentum accommodation coefficient measurements for various materials and gas species」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル