The optimum pumping power for optically pumped FIR lasers

Lin Yikun, Wen Yumin, Chen Danli, Takayuki Furuzuki

研究成果: Article

3 引用 (Scopus)

抄録

The relations between the output power of optically pumped FIR laser and the pumping power were studied theoretically by solving the density matrix equation of four-level system by means of the matrix signal flow graph method. The output power density of FIR laser was calculated by iteration method. A set of curves of output FIR power density against pumping power has been obtained. It has found that every of each curve has a maximum point of which the position is different for different pumping detuning. According the these results we predicted that there would exist an optimum pumping power density for an optically pumped FIR laser with certain pumping detuning. This theoretical results would help us to design the optically pumped FIR lasers.

元の言語English
ページ(範囲)1061-1074
ページ数14
ジャーナルInternational Journal of Infrared and Millimeter Waves
6
発行部数10
DOI
出版物ステータスPublished - 1985 10
外部発表Yes

Fingerprint

Pumping (laser)
pumping
Lasers
radiant flux density
lasers
Signal flow graphs
output
signal flow graphs
laser pumping
curves
iteration
matrices

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Physics and Astronomy (miscellaneous)
  • Electrical and Electronic Engineering

これを引用

The optimum pumping power for optically pumped FIR lasers. / Yikun, Lin; Yumin, Wen; Danli, Chen; Furuzuki, Takayuki.

:: International Journal of Infrared and Millimeter Waves, 巻 6, 番号 10, 10.1985, p. 1061-1074.

研究成果: Article

Yikun, Lin ; Yumin, Wen ; Danli, Chen ; Furuzuki, Takayuki. / The optimum pumping power for optically pumped FIR lasers. :: International Journal of Infrared and Millimeter Waves. 1985 ; 巻 6, 番号 10. pp. 1061-1074.
@article{c083ab80ee314aa28a1750b1fabc5fe0,
title = "The optimum pumping power for optically pumped FIR lasers",
abstract = "The relations between the output power of optically pumped FIR laser and the pumping power were studied theoretically by solving the density matrix equation of four-level system by means of the matrix signal flow graph method. The output power density of FIR laser was calculated by iteration method. A set of curves of output FIR power density against pumping power has been obtained. It has found that every of each curve has a maximum point of which the position is different for different pumping detuning. According the these results we predicted that there would exist an optimum pumping power density for an optically pumped FIR laser with certain pumping detuning. This theoretical results would help us to design the optically pumped FIR lasers.",
keywords = "Multiphoton processes, Nonlinear optics, Optically pumped FIR lasers, Submillimeter wave laser",
author = "Lin Yikun and Wen Yumin and Chen Danli and Takayuki Furuzuki",
year = "1985",
month = "10",
doi = "10.1007/BF01010682",
language = "English",
volume = "6",
pages = "1061--1074",
journal = "Journal of Infrared, Millimeter, and Terahertz Waves",
issn = "1866-6892",
publisher = "Springer New York",
number = "10",

}

TY - JOUR

T1 - The optimum pumping power for optically pumped FIR lasers

AU - Yikun, Lin

AU - Yumin, Wen

AU - Danli, Chen

AU - Furuzuki, Takayuki

PY - 1985/10

Y1 - 1985/10

N2 - The relations between the output power of optically pumped FIR laser and the pumping power were studied theoretically by solving the density matrix equation of four-level system by means of the matrix signal flow graph method. The output power density of FIR laser was calculated by iteration method. A set of curves of output FIR power density against pumping power has been obtained. It has found that every of each curve has a maximum point of which the position is different for different pumping detuning. According the these results we predicted that there would exist an optimum pumping power density for an optically pumped FIR laser with certain pumping detuning. This theoretical results would help us to design the optically pumped FIR lasers.

AB - The relations between the output power of optically pumped FIR laser and the pumping power were studied theoretically by solving the density matrix equation of four-level system by means of the matrix signal flow graph method. The output power density of FIR laser was calculated by iteration method. A set of curves of output FIR power density against pumping power has been obtained. It has found that every of each curve has a maximum point of which the position is different for different pumping detuning. According the these results we predicted that there would exist an optimum pumping power density for an optically pumped FIR laser with certain pumping detuning. This theoretical results would help us to design the optically pumped FIR lasers.

KW - Multiphoton processes

KW - Nonlinear optics

KW - Optically pumped FIR lasers

KW - Submillimeter wave laser

UR - http://www.scopus.com/inward/record.url?scp=0022145022&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022145022&partnerID=8YFLogxK

U2 - 10.1007/BF01010682

DO - 10.1007/BF01010682

M3 - Article

AN - SCOPUS:0022145022

VL - 6

SP - 1061

EP - 1074

JO - Journal of Infrared, Millimeter, and Terahertz Waves

JF - Journal of Infrared, Millimeter, and Terahertz Waves

SN - 1866-6892

IS - 10

ER -