Thermal ageing of soft and hard epoxy resins

Yoshimichi Ohki*, Naoshi Hirai

*この研究の対応する著者

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Two kinds of epoxy resin, a soft one with rubber-based additives and an ordinary hard one, are used as electrical insulators and airtight sealants in electrical penetrations in nuclear power plants (NPPs). Knowing how they behave under adverse environments is important for the safe operation of NPPs. In this regard, we gave artificial thermal ageing treatment to the two resins by heating them in air at various temperatures. The resins were then subjected to mechanical, thermal, and dielectric tests. As a result, it has become clear that the soft epoxy resin becomes hard, while its permittivity and loss factor decrease as the heating becomes longer. The glass transition tends to occur at a high temperature in the soft epoxy resin when it was heated. With these changes, the soft resin tends to exhibit similar behaviour in various properties to that of the unaged hard one. On the other hand, the hard one is hardly affected by the simulated thermal ageing. Therefore, both resins can be useable in NPPs.

本文言語English
ジャーナルHigh Voltage
DOI
出版ステータスAccepted/In press - 2022

ASJC Scopus subject areas

  • エネルギー工学および電力技術
  • 電子工学および電気工学

フィンガープリント

「Thermal ageing of soft and hard epoxy resins」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル