Towards Ultrasound Everywhere: A Portable 3D Digital Back-End Capable of Zone and Compound Imaging

Aya Ibrahim*, Shuping Zhang, Federico Angiolini, Marcel Arditi, Shinji Kimura, Satoshi Goto, Jean Philippe Thiran, Giovanni De Micheli

*この研究の対応する著者

研究成果: Article査読

6 被引用数 (Scopus)

抄録

Ultrasound imaging is a ubiquitous diagnostic technique, but does not fit the requirements of the telemedicine approach, because it relies on the real-Time manipulation and image recognition skills of a trained expert, called sonographer. Sonographers are only available in hospitals and clinics, negating or at least delaying access to ultrasound scans in many locales-rural areas, developing countries-as well as in medical rescue operations. Telesonography would require an advanced imager that supports three-dimensional (3-D) acquisition; this would allow untrained operators to acquire broad scans and upload them remotely for diagnosis. Such advanced imagers do exist, but do not meet several other requirements for telesonography, such as being portable, inexpensive, and sufficiently low power to enable battery operation. In this work, we present our prototype of the first portable 3-D digital ultrasound back-end system. The prototype is implemented in a single midrange Xilinx field programmable gate array (FPGA), for an estimated power consumption of 5 W. The device supports up to 1024 input channels, which is state of the art and could be scaled further, and supports multiple image reconstruction modes. We evaluate the resource utilization of the FPGA and provide various quality metrics to ascertain the output image quality.

本文言語English
論文番号8371274
ページ(範囲)968-981
ページ数14
ジャーナルIEEE Transactions on Biomedical Circuits and Systems
12
5
DOI
出版ステータスPublished - 2018 10

ASJC Scopus subject areas

  • 生体医工学
  • 電子工学および電気工学

フィンガープリント

「Towards Ultrasound Everywhere: A Portable 3D Digital Back-End Capable of Zone and Compound Imaging」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル