Transient stability characteristics of a 1-m single-layer YBCO cable

Atsushi Ishiyama*, Xudong Wang, Hiroshi Ueda, Masashi Yagi, Shinichi Mukoyama, Naoji Kashima, Shigeo Nagaya, Yuh Shiohara

*この研究の対応する著者

研究成果: Article査読

12 被引用数 (Scopus)

抄録

YBCO tapes are expected to be used in future high temperature superconductor (HTS) applications as they have better Jc characteristics at high temperatures and in high magnetic fields. For power applications such as transmission cables, YBCO tapes and a copper former are connected in parallel and they might be subjected to a short-circuit fault current that is 10 to 30 times the normal operating current. Therefore, the over-current behavior, including the hot-spot and the distribution of transport current between the copper-laminated YBCO tapes and the copper former, is very important to examine the stability and feasibility of the cable. This paper describes the experimental results for over-current pulses of a 1-m single-layer cable fabricated with five copper-laminated YBCO tapes and a copper former. Further, we performed numerical simulations by using a newly developed computer program based on the 3D finite element method.

本文言語English
論文番号4519802
ページ(範囲)1228-1231
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
18
2
DOI
出版ステータスPublished - 2008 6月

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学

フィンガープリント

「Transient stability characteristics of a 1-m single-layer YBCO cable」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル