Traveling wave transport of particles and particle size classification

Hiroyuki Kawamoto, Naoto Hasegawa, Kyogo Seki

    研究成果: Article

    1 引用 (Scopus)

    抄録

    A basic research is being carried out on transport of particles and particle size classification in electrostatic traveling field. A particle conveyor consisting of parallel electrodes was constructed and four -phase traveling electrostatic wave was applied to the electrodes to transport particles on the conveyer. The following were clarified by the experiment: (1) Particles were transported almost linearly with time. A transport rate was also linear with applied voltage but a threshold existed due to adhesion force. (2) The direction of particle transport did not always coincide with that of the traveling wave but partially changed depending on the frequency of the traveling wave, the particle diameter, and the electric field. Particles were vibrated but not transported under high frequency field. (3) Particles were efficiently transported under conditions of low frequency, high voltage, and the application of rectangular wave. (4) Particles were classified with size under the voltage application of appropriate frequency.

    元の言語English
    ページ(範囲)1216-1221
    ページ数6
    ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
    69
    発行部数5
    出版物ステータスPublished - 2003 5

    Fingerprint

    Particle size
    Electrostatics
    Electric potential
    Electrodes
    Adhesion
    Electric fields
    Experiments

    ASJC Scopus subject areas

    • Mechanical Engineering

    これを引用

    @article{161918afe31e46c484e1abbe5c294119,
    title = "Traveling wave transport of particles and particle size classification",
    abstract = "A basic research is being carried out on transport of particles and particle size classification in electrostatic traveling field. A particle conveyor consisting of parallel electrodes was constructed and four -phase traveling electrostatic wave was applied to the electrodes to transport particles on the conveyer. The following were clarified by the experiment: (1) Particles were transported almost linearly with time. A transport rate was also linear with applied voltage but a threshold existed due to adhesion force. (2) The direction of particle transport did not always coincide with that of the traveling wave but partially changed depending on the frequency of the traveling wave, the particle diameter, and the electric field. Particles were vibrated but not transported under high frequency field. (3) Particles were efficiently transported under conditions of low frequency, high voltage, and the application of rectangular wave. (4) Particles were classified with size under the voltage application of appropriate frequency.",
    keywords = "Electromagnetic Induced Vibration, Electrostatic Force, Information Processing Equipment, Laser Printer, Particle Size Classification, Traveling Wave",
    author = "Hiroyuki Kawamoto and Naoto Hasegawa and Kyogo Seki",
    year = "2003",
    month = "5",
    language = "English",
    volume = "69",
    pages = "1216--1221",
    journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",
    issn = "0387-5024",
    publisher = "Japan Society of Mechanical Engineers",
    number = "5",

    }

    TY - JOUR

    T1 - Traveling wave transport of particles and particle size classification

    AU - Kawamoto, Hiroyuki

    AU - Hasegawa, Naoto

    AU - Seki, Kyogo

    PY - 2003/5

    Y1 - 2003/5

    N2 - A basic research is being carried out on transport of particles and particle size classification in electrostatic traveling field. A particle conveyor consisting of parallel electrodes was constructed and four -phase traveling electrostatic wave was applied to the electrodes to transport particles on the conveyer. The following were clarified by the experiment: (1) Particles were transported almost linearly with time. A transport rate was also linear with applied voltage but a threshold existed due to adhesion force. (2) The direction of particle transport did not always coincide with that of the traveling wave but partially changed depending on the frequency of the traveling wave, the particle diameter, and the electric field. Particles were vibrated but not transported under high frequency field. (3) Particles were efficiently transported under conditions of low frequency, high voltage, and the application of rectangular wave. (4) Particles were classified with size under the voltage application of appropriate frequency.

    AB - A basic research is being carried out on transport of particles and particle size classification in electrostatic traveling field. A particle conveyor consisting of parallel electrodes was constructed and four -phase traveling electrostatic wave was applied to the electrodes to transport particles on the conveyer. The following were clarified by the experiment: (1) Particles were transported almost linearly with time. A transport rate was also linear with applied voltage but a threshold existed due to adhesion force. (2) The direction of particle transport did not always coincide with that of the traveling wave but partially changed depending on the frequency of the traveling wave, the particle diameter, and the electric field. Particles were vibrated but not transported under high frequency field. (3) Particles were efficiently transported under conditions of low frequency, high voltage, and the application of rectangular wave. (4) Particles were classified with size under the voltage application of appropriate frequency.

    KW - Electromagnetic Induced Vibration

    KW - Electrostatic Force

    KW - Information Processing Equipment

    KW - Laser Printer

    KW - Particle Size Classification

    KW - Traveling Wave

    UR - http://www.scopus.com/inward/record.url?scp=0038712911&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0038712911&partnerID=8YFLogxK

    M3 - Article

    AN - SCOPUS:0038712911

    VL - 69

    SP - 1216

    EP - 1221

    JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

    JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

    SN - 0387-5024

    IS - 5

    ER -