Ultra small electro-optic field probe fabricated by aerosol deposition

Mizuki Iwanami*, Masafumi Nakada, Hiroki Tsuda, Keishi Ohashi, Jun Akedo

*この研究の対応する著者

研究成果: Article査読

18 被引用数 (Scopus)

抄録

We developed a microscopic electro-optic field probe by directly depositing a lead zircoriate-titariate [PbZr0.3Tio0.7O3] film onto the optical fiber edge using aerosol deposition. Its fabrication process is low-cost and relatively easy because there are no complicated procedures such as fine lithography and etching. The lateral size of the film is 125 μm, which is the same as the diameter of a typical single mode fiber, and the thickness is approximately 5 μm. An RF electro-optic signal was successfully measured over a microstrip line. The capability for detecting GHz range fields is also shown. Because it is very tiny and thin, the developed electro-optic probe has great potential for detailed electrical characterization in the microscopic regions of high performance electronic products such as the interconnecting parts between LSI packages and printed circuit boards and spaces among different LSI chips in a package.

本文言語English
ページ(範囲)26-32
ページ数7
ジャーナルieice electronics express
4
2
DOI
出版ステータスPublished - 2007 1 25
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学

フィンガープリント

「Ultra small electro-optic field probe fabricated by aerosol deposition」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル