Update of YOKOHAMA HTS cable project

Hiroyasu Yumura*, Yuichi Ashibe, Masayoshi Ohya, Hideki Itoh, Michihiko Watanabe, Takato Masuda, Hiroshi Ichikawa, Tomoo Mimura, Shoichi Honjo, Tsukushi Hara, Ryusuke Ohno, Masahiro Shimoda, Naoko Nakamura, Toshihiro Komagome, Hiroharu Yaguchi

*この研究の対応する著者

研究成果: Article査読

56 被引用数 (Scopus)

抄録

The high-temperature superconducting (HTS) cable demonstration project supported by Ministry of Economy, Trade and Industry and New Energy and Industrial Technology Development Organization has started in Japan. The target of this project is to operate a 66 kV, 200 MVA HTS cable in the live network of Tokyo Electric Power Company in order to demonstrate its reliability and stable operation. The design of the HTS cable with DI-BSCCO has been completed as well as those of a termination and a joint. A 30-m HTS cable system with terminations, a splice, and a cooling system was installed in the SEI facility and confirmed the cable has good performances as design. The HTS cable, splice box, and termination vessels have been manufactured with the same design of a 30-m cable system. By now, the HTS cables have been installed into the conduit at the Asahi substation of Tokyo Electric Power Company. The constructions of splice and terminations have been completed. The HTS cable system at Asahi substation was cooled down in this spring. This paper describes the design and completion test results of the HTS cable system.

本文言語English
論文番号6458991
ジャーナルIEEE Transactions on Applied Superconductivity
23
3
DOI
出版ステータスPublished - 2013
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学

フィンガープリント

「Update of YOKOHAMA HTS cable project」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル