Variable multi-color microfluidic organic light emitting device based on mixing of electrochemiluminescence solutions

T. Kasahara, J. Mizuno, S. Matsunami, T. Edura, M. Tsuwaki, J. Oshima, C. Adachi, S. Shoji

研究成果: Conference contribution

6 被引用数 (Scopus)

抄録

We developed a variable multi-color microfluidic organic light emitting device based on mixing of different electrochemiluminescence (ECL) solutions. The prototype of microfluidic device consisted of Y-shaped SU-8 microchannels sandwiched between polyethylene naphthalate (PEN) and glass substrates having indium tin oxide (ITO) anode and cathode pairs. 5,6,11,12-tetraphenylnaphthacene (rubrene) and tetraphenyldibenzoperiflanthene (DBP) doped rubrene were used as ECL materials. Yellow, red, and orange color emissions from the ECL cell were obtained by changing DBP concentration in rubrene solution. Multi-color ECL was confirmed from the fabricated Y-shaped microfluidic device before and after mixing of ECL solutions.

本文言語English
ホスト出版物のタイトル2013 Transducers and Eurosensors XXVII
ホスト出版物のサブタイトルThe 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013
ページ2596-2599
ページ数4
DOI
出版ステータスPublished - 2013 12 1
イベント2013 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013 - Barcelona, Spain
継続期間: 2013 6 162013 6 20

出版物シリーズ

名前2013 Transducers and Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013

Conference

Conference2013 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013
CountrySpain
CityBarcelona
Period13/6/1613/6/20

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

フィンガープリント 「Variable multi-color microfluidic organic light emitting device based on mixing of electrochemiluminescence solutions」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル