Vibration and sound-radiation analysis for designing a low-noise gearbox with a multi-stage helical gear system

Eiichirou Tanaka*, Haruo Houjoh, Daisuke Mutoh, Hirofumi Motoshiromizu, Kousaku Ohno, Naoyuki Tanaka

*この研究の対応する著者

研究成果: Article査読

26 被引用数 (Scopus)

抄録

A method for predicting gear noise from the vibration step to the sound-generation step of a complete gear system, including a gearbox, was developed. This method consists of three separate steps: gear-vibration analysis by an in-house program, gearbox-vibration analysis by an FEA program, and sound-radiation analysis by a commercial software. By using this method, it can obtain the vibration behavior of the gear and gearbox, and the distribution of the sound-pressure around the gearbox and identify the areas from which noise radiates intensely. To validate the method, we measured the displacement of a gear shaft, the acceleration of points on the surface of the gearbox, and the sound-pressure levels around the gearbox. The measured results agreed well with the corresponding calculations. According to the calculated noise, a low-noise gearbox was designed by adding ribs near the antinodes of the gearbox's vibration mode.

本文言語English
ページ(範囲)1178-1185
ページ数8
ジャーナルJSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing
46
3
DOI
出版ステータスPublished - 2003 9
外部発表はい

ASJC Scopus subject areas

  • 機械工学
  • 産業および生産工学

フィンガープリント

「Vibration and sound-radiation analysis for designing a low-noise gearbox with a multi-stage helical gear system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル