W(310) cold-field emission characteristics reflecting the vacuum states of an extreme high vacuum electron gun

Boklae Cho*, Kokubo Shigeru, Chuhei Oshima

*この研究の対応する著者

研究成果: Article査読

6 被引用数 (Scopus)

抄録

An extremely high vacuum cold-field electron emission (CFE) gun operating at pressures ranging from ∼10-8 Pa to ∼10-10 Pa was constructed. Only the CFE current emitting from W(310) surfaces revealed the existence of a "stable region" with high current angular density just after tip flash heating. In the "stable region," the CFE current was damped very slowly. The presence of non-hydrogen gas eliminated this region from the plot. Improvement of the vacuum prolonged the 90% damping time of the CFE current from ∼10 min to 800 min. The current angular density I′ of CFE current was 60 and 250 μA/sr in the "stable region" for total CFE currents of 10 and 50 μA, respectively. These results were about three times larger than I′ when measured after the complete damping of the CFE current. The CFE gun generated bright scanning transmission electron microscopy images of a carbon nanotube at 30 kV.

本文言語English
論文番号013305
ジャーナルReview of Scientific Instruments
84
1
DOI
出版ステータスPublished - 2013 1

ASJC Scopus subject areas

  • 器械工学

フィンガープリント

「W(310) cold-field emission characteristics reflecting the vacuum states of an extreme high vacuum electron gun」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル