Wire-Driven microforceps for a neurosurgery support system

Toshikazu Kawai, Kazutoshi Kan, Kouji Nlshizawa, Masakatsu Fujie, Takeyoshi Dohi, Kintomo Takakura, Kenzo Akazawa

    研究成果: Article査読

    抄録

    An exchangeable microforceps for neurosurgery - which can be inserted into micromanipulators of a minimally invasive surgery-support system (called the hyper utility mechatronic assistant system, HUMAN) - was developed. This microforceps, which performs open-close operation at bending by means of a drive wire, is a single-opening type. It meets the specification of an outside diameter of 1 mm and a maximum holding force of 1 N, and a prototype was made of stainless steel by electric discharge machining. A microforceps drive-system was also constructed, and its dynamic characteristics were experimentally measured by a" laser-sensor system. The forceps was then applied in an experiment on a swine brain tissue in vivo, and it was confirmed that its holding function is good enough for practical use. The results of these two experiments are being applied so that the holding-part mechanism and its dynamic characteristics can be further improved for clinical use. It is concluded that this newly developed microforceps will be a great help in further developing minimally invasive neurosurgery using HUMAN.

    本文言語English
    ページ(範囲)122-128
    ページ数7
    ジャーナルJapanese Journal of Medical Electronics and Biological Engineering
    41
    2
    出版ステータスPublished - 2003

    ASJC Scopus subject areas

    • Biomedical Engineering

    フィンガープリント 「Wire-Driven microforceps for a neurosurgery support system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル