X-ray tomography based finite element modelling of non-crIMP fabric based fibre composite

Kristine M. Jespersen, Leif E. Asp, Atsushi Hosoi, Hiroyuki Kawada, Lars P. Mikkelsen

研究成果: Conference contribution

抄録

The current study presents a workflow to import a fibre bundle structure of a non-crimp fabric based fibre composite obtained by X-ray CT to a solvable 3D model in the finite element software ABAQUS. The considered fibre composite is similar to that used for the load carrying parts of wind turbine blades, and each layer of the non-crimp fabric contains fibre bundles oriented in the 0, 90, and ±45 directions. The 3D fibre bundle geometry is first segmented in the software AVIZO and then imported to Geomagic Wrap where the geometry is smoothened and converted into a nurbs surface that can be imported into ABAQUS. The resulting stress distribution is qualitatively compared to previous experimental observations and discussed.

本文言語English
ホスト出版物のタイトルECCM 2018 - 18th European Conference on Composite Materials
出版社Applied Mechanics Laboratory
ISBN(電子版)9781510896932
出版ステータスPublished - 2020
イベント18th European Conference on Composite Materials, ECCM 2018 - Athens, Greece
継続期間: 2018 6 242018 6 28

出版物シリーズ

名前ECCM 2018 - 18th European Conference on Composite Materials

Conference

Conference18th European Conference on Composite Materials, ECCM 2018
CountryGreece
CityAthens
Period18/6/2418/6/28

ASJC Scopus subject areas

  • Ceramics and Composites

フィンガープリント 「X-ray tomography based finite element modelling of non-crIMP fabric based fibre composite」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル